| 1. |
- Bergknut, Magnus, et al.
(författare)
-
Assessment of the availability of polycyclic aromatic hydrocarbons from gasworks soil using different extraction solvents and techniques
- 2004
-
Ingår i: Environmental Toxicology and Chemistry. - : Wiley. - 0730-7268 .- 1552-8618. ; 23:8, s. 1861-1866
-
Tidskriftsartikel (refereegranskat)abstract
- This study was designed to assess the availability of polycyclic aromatic hydrocarbons (PAHs) present at a gasworks site to different soil remediation techniques. The study examined the effect on PAH availability of using different organic solvents, the degree of pretreatment, and the extraction time. In total, 25 PAHs (with two to six fused rings) and five carbonyl derivatives were measured. The results indicated that the PAHs and their derivatives were bound loosely to the surface of the studied soil and that there were no significant kinetic boundaries associated with the extraction of the PAHs. Furthermore, it was concluded that the studied soil was not suitable for bioremediation, as the concentration of PAHs with low molecular weight were limited. However, pressurized liquid extraction (PLE) with methanol as the solvent extracted 97% of all PAHs and PAH-derivatives, indicating that extraction may be effective as part of a soil remediation technique for old gasworks soils.
|
|
| 2. |
|
|
| 3. |
- Harju, Mikael, et al.
(författare)
-
Multivariate physicochemical characterisation and quantitative structure–property relationship modelling of polybrominated diphenyl ethers
- 2002
-
Ingår i: Chemosphere. ; 47:4, s. 375-84
-
Tidskriftsartikel (refereegranskat)abstract
- Levels of polybrominated diphenyl ethers (PBDEs) are increasing in the environment and may cause long-term environmental problems. Developing a model describing the chemical variation among the 209 possible congeners would be a useful step in any systematic approach for assessing the fate and risk posed by the PBDEs. Therefore, 40 physicochemical descriptors were derived for all PBDEs using a semi-empirical method (AM1), molecular mechanics, and empirically estimated parameters. Descriptors included heats of formation, frontier molecular orbital energies, atomic charges, dipole moments, logP values, and molecular surface areas. Principal component analysis (PCA) was used to evaluate the descriptors. The first four PCs, explaining 76% of the variation in the data, described the size, charge distribution and symmetric elements of the congeners. A quantitative structure–activity relationship model was constructed based on data for dioxin-like activity (using the luciferase bioassay) for 17 PBDEs with the partial least squares method. In addition, quantitative structure–property relationship models for gas chromatographic relative retention times on four capillary columns were developed. These models proved suitable to assist in the identification of untested PBDEs. Based on the results of the PCA, a factorial design was applied for selecting 21 representative congeners, PBDEs 11, 13, 17, 32, 35, 47, 53, 77, 85, 99, 119, 135, 153, 155, 156, 169, 176, 181, 190, 192, and 209. The spacing of these congeners in the physicochemical domain maximises the coverage of key factors such as molecular size and substitution pattern. Consideration of the selected congeners should be useful for guiding the synthesis of new compounds for use in future studies of the fate and biological effects of PBDEs.
|
|
| 4. |
- Lundstedt, Staffan, et al.
(författare)
-
Pressurised liquid extraction of polycyclic aromatic hydrocarbons from contaminated soils
- 2000
-
Ingår i: Journal of Chromatography A. ; 883:1-2, s. 151-62
-
Tidskriftsartikel (refereegranskat)abstract
- The reliability and efficiency of the pressurised liquid extraction technique (PLE) for extracting polycyclic aromatic hydrocarbons (PAHs) from contaminated soil has been investigated. Experimental design was used to study the influence of seven extraction variables (sample load, solvents used, solvent ratios, pressure, temperature, extraction time, and rinse volume). The results show that large sample loads in combination with small solvent volumes may result in low extraction efficiency. They also indicate that the recovery of low-molecular-mass PAHs is reduced by low extraction temperatures. The exact settings of the other variables are, however, less significant for the extraction efficiency. Repeated extractions at optimised settings of the tested variables show that PLE is an exhaustive extraction technique that generally results in high yields. In addition, extraction of a certified reference material (CRM 103-100) revealed that the method is both accurate and precise. Another finding was that adding the internal standard on top of the soil in the extraction cell causes considerable over-estimation of the concentrations when large samples are extracted with small solvent volumes. This is because the PLE-cell resembles a chromatographic column, so compounds added to the top of the soil layer have a longer distance to travel through the soil compared to the average distance of the native compounds, which are distributed evenly throughout the column. We therefore recommend that the internal standard should be added to the extract immediately after the extraction or, alternatively, carefully mixed with the sample prior to extraction.
|
|
| 5. |
|
|
